Cisco WLC Basic Installation

System Name [Cisco_e2:6d:84] (31 characters max): WLC2504
Enter Administrative User Name (24 characters max): admin
Enter Administrative Password (3 to 24 characters): ********
Re-enter Administrative Password : ********

Management Interface IP Address: 192.168.1.10
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 192.168.1.1
Management Interface VLAN Identifier (0 = untagged): 0
Management Interface Port Num [1 to 4]: 1
Management Interface DHCP Server IP Address: 192.168.1.1

AP Manager Interface IP Address: 192.168.1.9

Virtual Gateway IP Address: 1.1.1.1

230.255.255.230

Mobility/RF Group Name: RF

Network Name (SSID): Wireless

Configure DHCP Bridging Mode [yes][NO]: NO

Allow Static IP Addresses [YES][no]: YES

Configure a RADIUS Server now? [YES][no]: No

Enter Country Code list (enter 'help' for a list of countries) [US]: OM

Enable 802.11b Network [YES][no]: YES

Enable 802.11g Network [YES][no]: yes

Enable Auto-RF [YES][no]: yes

Configure a NTP server now? [YES][no]: no

Configuration correct? If yes, system will save it and reset. [yes][NO]: yes